Office Pro 63

The MovinCool Office Pro 63 portable air conditioner is specifically designed to provide cooling for computer rooms and data centers filled with heat-generating electronics.
  • 60,000 Btu/hr Cooling Capacity
  • Operates on 460V power / Three Phase
  • No costly installation
Office Pro Series Classic Series
Office Pro 12
Office Pro 18
Office Pro 24
Office Pro 36
Office Pro 60
Classic 10
Classic Plus 14
Classic 18
Classic Plus 26

Specifications

 
Electronic Features Control Panel Programmable
Thermostat Control Electronic
Cooling Capacity Rating Conditions:
95F at 60% RH
60,000 Btu/h
Electrical
Characteristics
Voltage Requirement 3 Phase, 460V
Total Power Consumption 6.6 kW
Current Consumption 9.5 amps
Recommended Fuse Size 20 amps
NEMA Plug Configuration L16-20
Min.Max. Voltage 440 - 480
Fans Motor Output 0.5/0.33 kW Evap.
1.2/0.93 kW Cond.
Evaporator Fan Type Centrifugal
Max.Air Flow high/low 1940/1770 CFM
Max. External Static Pressure 0.9 IWG
Condenser Fan Type Centrifugal
Max.Air Flow high/low 2830/2650 CFM
Max. External Static Pressure 0.85 IWG
Compressor Type Hermetic Scroll
Output 3.3 kW
Refrigerant   R-410A
Dimensions W x D x H 30 x 52 x 64 in
Net Weight/
Shipping Weight
  705/835 lb
Power Cord Gauge 12 AWG
(4-core)
Length 6 ft
Condensate
Tank Capacity
  Auto Pump Included
Operating Conditions Min. Max. (@ 50% RH) 65° - 105°F
Max. Duct
Length
Per Cold Duct Hose 40 ft
Hot Duct Hose 100 ft
Max.
Sound Level
With Condenser - Duct high/low 69/67 dB(A)
Without Condenser - Duct high/low 71/69 dB(A)
NOTE: All specifications subject to change without notice.
Spot Cooling Portable design brings 60,000 Btu/hr cooling to the area or room in a highly efficiently way to cool “hot spots.”
Weekend/After-hours Cooling Cost-effective cooling alternative for weekend or after-hours cooling when the building’s air conditioner is shut down
Programmable Controller Backlit control panel with seven-day programming capability allows easy viewing even in low-light conditions
Sensitive Electronic Cooling Provides cooling down to 65°F for ideal environmental conditions
Easy to Install No costly installation necessary – roll it in, plug it in, and turn it on
Affordable Insurance Policy Store unit in closet, and install within minutes when the permanent air conditioner is no longer sufficient or completely fails
Automatic Restart Returns the unit to its last operating status in the event of a power failure
Freeze Protection Temperature sensor on evaporator coil prevents ice buildup, which can cause blockage of cool airflow and water leaks
Three Phase Protection Phase-reversal protection to prevent potential damage to motors and compressors

Accessories

No. Part Name Office Pro 63 - Part Description Part Number
1. Nozzle Adapter Kit Three-piece metal frame converts airflow from louvers to nozzles or cold air ducts. Includes mounting screws. (Nozzles and ducts sold separately.) LAY45770-0070
1A. Duct Adapter Kit Same as above, but for use with cold air flexible ducts. Includes flange. (Cold air flexible ducts sold separately.) LAY45770-0080
2. Nozzle Kit 6" diameter white plastic nozzle that extends up to 2' in length. Includes flange, mounting screws and trim ring. (Purchase in sets of two.) 484209-0050
3. Cold Air Flange Kit 6" diameter white metal flange with wire clamp and mounting screws.Use with cold air ducts. 481170-0250
4. Cold Air Extension Duct 6" adjustable diameter, white plastic duct that extends from 6-1/2' to 10' in length. 481744-0030
4B. Cold Air Self-Supported Duct 8"adjustable diameter, white plastic duct that extends from 6-1/2' to 10' in length. LAY45810-0080
4A. Cold Air Flexible Duct 8" diameter wire-reinforced, accordion-style duct in 25' lengths. LAY45810-0030
5. Trim Ring 6" diameter black plastic ring mounts as end caps for extension duct. 481851-0210
7. Ceiling Tile Kit 24" x 24" sheet metal tile with 16" hole for warm air flexible duct kit GX484410-8940
8. Condenser Air Plenum White plastic plenum for return air to condenser. Hinged for filter cleaning. LAY84270-0060
9. Condensate Pump Kit Included with this model. Included
10. Condensate Tank Drain tank storage for condensation. Requires condensate float, sold separately. (For OP60 only) 484730-0010
10A. Condensate Float (not shown) Controls water level in condensate tanks. (For OP60 only) 484460-0010
11. Evaporator Air Plenum White plastic plenum for return air to evaporator. LAY84270-0070
12. Warm Air Flexible Duct Kit 16" diameter wire-reinforced, accordion-style duct in 25' length for condenser exhaust or evaporator intake. Includes clamp. LAY45820-0010

Photos...